Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quick start guide CellaTemp PT
The emissivity ratio is set as follow
► Press [▲or▼] until the desired emissivity ratio is shown.
EN
► Release [▲or▼]
> The current temperature value is displayed and the new emissivity ratio
coefficient is stored.
It is recommended to use the ATD function for the measurement. All pa-
rameters can be set directly at the pyrometer. Record the adjusted pa-
rameters.
Shipping, packing and disposal
Inspection after shipping
Unpack and inspect the entire shipment immediately upon receipt to
make sure it is complete and undamaged. If the container/package
shows visible signs of damage, please refuse the shipment. If this is not
possible, accept the shipment on the condition that the freight carrier's
delivery record is noted with the extent of the damage in order to file a
claim. Should you discover a concealed loss or damage, report it to the
shipper or freight carrier immediately. If the period for filing claims has
expired, you will no longer be able to make any claims for compensation
of damage or loss.
Packing
The packages used are made of carefully selected, environmentally
compatible materials and are thus recyclable. Please ensure that they
are disposed of in an ecologically sound manner
Disposal of the old device
Old electrical and electronic devices frequently still contain
valuable materials.
These devices can be returned for disposal to the manufac-
turer or they must be disposed properly by the user.
For the improper disposal of the device by the user, the com-
pany KELLER HCW is not responsible..
.
Werbung
