KELLER CellaPort PT 14-Serie Kurzanleitung Seite 7

Quick start guide CellaTemp PT
General
This guide gives you the minimum information to properly install the py-
rometers of the PT series. For detailed information please refer to the user
guide CellaTemp PT. You can download it under the following link:
www.keller.de/en/its/temperature-pyrometers-downloads/
Explanation of symbols
Important safety-related references in this manual are marked with a sym-
bol.
CAUTION: This symbol points out hints and information which
should be heeded for efficient and trouble-free operation..
► Action: This symbol instructs the operator to take action
> Reaction, Result: This symbol indicates the result of the action
taken.
Charging the batteries
Connect the battery charging socket of the CellaPort to the provided
power supply (9 V DC). The charge indicator lights as long as the batter-
ies are being charged. A complete charging cycle takes approx. 15
hours.
Only use the power supply which comes with the pyrometer. Do
not use any other power supply as this may cause irreparable dam-
age to the device.
The charger is only for charging the battery. The rechargeable bat-
tery is only charged when the pyrometer is switched off.
EN