Technoline WS 9117 Betriebsanleitung Seite 41

HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE
TRANSMITTER
The Temperature transmitter uses 2 x AA, IEC LR6, 1.5V batteries.
When batteries will need to be replaced, the low battery icon will appear
on the LCD of the Temperature Station. To install and replace the
batteries, please follow the steps below :
1. Remove the battery cover.
2. Insert the batteries, observing the correct polarity (see marking).
3. Replace the battery cover on the unit.
Note : In the event of changing batteries in any of the units, all units need to be reset by
following the setup procedures. This is because a random security code is assigned by
the transmitter at start-up and this code must be received and stored by the Temperature
Station in the first 3 minutes after power supplying.
40