Technoline WS 9117 Betriebsanleitung Seite 37

0:00 will be displayed. If these informations are not displayed on the LCD after 60
seconds, remove the batteries and wait for at least 60 seconds before reinserting
them. Once the indoor data is displayed user may proceed to the next step.
3. After the batteries are inserted, the Temperature Station will start receiving data
signal from the transmitter. The outdoor temperature should then be displayed on
the Temperature station. If this does not happen after 2 minutes, the batteries will
need to be removed from both units and reset from step 1.
4. In order to ensure sufficient 868 MHz transmission however, the distance between
the Temperature Station and the transmitter should not be more than 100 meters
(see notes on "Positioning" and "868 MHz Reception").
WHEN MORE THAN ONE TRANSMITTER IS USED
1. User shall remove all the batteries from the Temperatuire Station and transmitters
and wait 60 seconds.
36