Technoline WS 9117 Betriebsanleitung Seite 44

*When the signal is successfully received by the Temperature Station, the outdoor
transmission icon will be switched on. (If not successful, the icon will not be shown on
LCD) So the user can easily see whether the last reception was successful (icon on) or
not (icon off). On the other hand, the short blinking of the icon shows that a reception is
currently taking place.
12 OR 24 HOUR SETTING:
After the batteries are inserted, set the time display as follow :
1. Press and hold the "SET/CH" key for about 3 seconds to enter the set mode
2. Either a ": 12h" or ": 24h" will appear on the LCD. If ": 12h" is displayed then the
current time display is set to 12-hour time. If ": 24h" is displayed then the current
time is set to 24-hour time.
3. To alternate between the two times display mode, simply press the "MIN/MAX/+"
key.
43