RESETTING THE MINIMUM AND MAXIMUM READINGS :
User may reset the minimum and maximum temperature data to the current value by the
following step :
Press and hold the MIN/MAX/+ key for about 3 seconds to reset all the minimum/
maximum data of all channels and the indoor sensor to the current values in a single
action.
OUTDOOR TEMPERATURE CHANNEL 1, 2, AND 3
If more than one transmitter is used, and to alternate between the temperature readings
of transmitter 1, 2, and 3, simply press the "SET/CH" key. If the reading is from
transmitter 1, then the identification number "1" will be displayed in the outdoor
temperature section of the LCD. The same will apply to the next transmitter and so on.
However, if only one transmitter is used, no identification number will be displayed on the
LCD.
49