eta PROFI 046790010 Bedienungsanleitung Seite 15

For trouble–free operation of the vacuum cleaner, please use the
tested micro–filters recommended by the producer.
II. EQUIPMENT AND ACCESSORY OF ETA VACUUM CLEANER – LINE0467 (pic. 1)
A – vacuum cleaner
A1 – suction opening
A2 – suction space lid
A3 – lid closure
A4 – safety valve
A5 – handle
B – accessory
B1 – floor nozzle
B2 – suction hose
B3 – suction tubes
B4 – cushion nozzle with brush
You can connect the appliance directly to the hose handle or to the tube.
III. PREPARATION AND USE
Remove all packaging material, remove the vacuum cleaner and accessory. Plug the fork
of the supply cord A8 into the el. plug. Assemble the accessory of the cleaner B1, B2, B3
(pic. 2, 3). Floor nozzle B1 is intended for vacuuming carpets or smooth floors (obr. 4).
If the floor nozzle is equipped with a brush, you may slide it out when vacuuming hard floors.
The slit nozzle B5 may be used for vacuuming hard–accessible places (pic. 5). The cushion
nozzle B4 may be used for vacuuming different kinds of furniture (pic. 6). Turn the vacuum
cleaner on/off by pressing the switch button A9 marked with "
control the suction power by the handle regulation on the hose B2 (pic. 8). After finishing
cleaning, unplug the cleaner from the el. outlet. Curl the supply cord into an oval shape and
put in the holder A7 (pic. 9). The cleaner may be held by the holder A5 and carried over
obstacles (e.g. doorsills, steps. We recommend turning the cleaner off when carrying.
Dust filter cleaning
If the suction power of the cleaner decreases during operation, the dust filter needs to be
cleaned. Tip out the lid A2 of the cleaner by pressing closure A3 (pic.10). Then pull the front
of the dust filter B6 out of the holder (pic. 11). Slide out the lath from one side of the filter
(pic. 12), the textile filter will open and the dust can be dumped. The filter needs to be dusted
(pic. 13). Put the lath on reversely. Slide the front of the dust filter into the holder in the suction
space of the vacuum cleaner and push all the way. Press to close the lid of the cleaner.
Important precautions
– The maximum suction effect will be reached with a clean micro–filter and an empty dust filter
– For sanitary reasons we recommend emptying the dust filter outside residential premises.
– Do not wash, soak etc. the textile dust filter, do not use a damaged textile dust filter!
– Make sure that the contact surfaces and sealing elements are functional.
Suction micro filter
After filling the dust filter approx. 5 times, it needs to be changed for a new one. Loosen the
arrest ring by turning it in the direction of an arrow and remove it (pic. 14). Remove the used
micro filter and dispose it with common house waste. Put the new filter in reversely and fasten
it with the arrest ring. Make sure that the bearing area and sealing elements are functional.
ATTENTION: Neglecting the replacement of the micro filters may lead to failure of the
vacuum cleaner!
A6 – outlet cover
A7 – cord holder
A8– supply cord
A9 – The START/STOP button
A10 – wheels
B5 – slit nozzle
B6 – dust filter
B7 – suction micro filter
B8 – nozzle for vacuuming hard floors
15/ 31
" symbol (pic. 7). You may
GB