Horizon 9-Serie Nutzerhandbuch Seite 36

To disconnect from a wireless network and delete your saved wireless network profile (if
previously saved), highlight this option and press OK. This option will not be available
Disconnect
if you did not connect to a wireless network. Refer to Connectivity section for more
information.
If your modem/router device has WPS, you can directly connect to it using this option.
Press WPS on your
Highlight this option and press OK. Go to your modem/router device and press the
wifi router WPS button on it to make the connection. This option will be available if the Network
Type is set as Wireless Device.
Start a speed test to check your connection bandwidth. The result will be displayed on
Internet Speed Test
the screen when finished.
Advanced Settings Change the IP and DNS configurations of your TV.
Networked Standby
Enable or disable this feature by setting it as On or Off.
Mode
Note: For detailed information on the options of this menu refer to the Connectivity section.
Installation Menu Content
Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations.
Automatic channel
D. Cable: Searches and stores cable DVB stations. Analogue: Searches and stores
scan (Retune)
analogue stations.
Manual channel
This feature can be used for direct broadcast entry.
scan
Searches for the linked channels in the broadcast system. D. Aerial: Searches for aerial
Network channel
network channels. D. Cable: Searches for cable network channels. Satellite: Searches
scan
for satellite network channels.
You can use this setting for fine tuning analogue channels. This feature is not available
Analogue fine tune if no analogue channels are stored and if currently watched channel is not an analogue
channel.
Displays satellite settings. Satellite list: Displays available satellites. You can Add,
Satellite Settings Delete satellites or Edit satellite settings on the list. Antenna installation: You can
change satellite antenna settings and/or start a satellite scan.
Displays installation settings menu. Standby Mode Search (*): Your TV will search for
new or missing channels while in standby. Any new found broadcasts will be shown.
Installation Settings Dynamic Channel Update(*): If this option is set as Enabled, the changes on the
(optional) broadcasts such as frequency, channel name, subtitle language etc., will be applied
automatically while watching.
(*) Availability depends on model.
Using this menu, you can edit the main and backup home transponder parameters,
including the Pid of the related M7 operator, which are used to download the channel
Setup Home
list. Set your preferences and press the Green button to save the settings. Then start
Transponder (*)
an M7 operator installation using the Automatic channel scan>Satellite menu.
(*) This menu option will only be available if an M7 operator installation is performed.
Use this setting to clear channels stored. This setting is visible only when the Country
Clear Service List
option is set to Denmark, Sweden, Norway or Finland.
Select Active
This setting allows you to select only the broadcasts within the selected network to be
Network listed in the channel list. This feature is available only for the country option of Norway.
You can use this menu item to monitor signal related information such as signal level/
Signal Information
quality, network name, etc. for available frequencies.
First time installation
Deletes all stored channels and settings, resets TV to factory settings.
English - 22 -
System Menu Content
Displays accessibility options of the TV. Some options will not be available if no channels
Accessibility
are installed.
Increase the contrast of the menu options and texts to make them easier to read. White
High Contrast
Text, Yellow Text and Off options will be available.
Hard of Hearing Enables any special feature sent from the broadcaster.
A narration track will be played for the blind or visually impaired audience. Press OK
to see all available Audio Description menu options. This feature is available only if
Audio
the broadcaster supports it.
Description
Note: Audio description sound feature is not available in recording or time shifting mode (availability depends
on the model of your TV and its features).
This feature provides sound postprocessing options for speech-gated dialogue
enhancement. Off, Low, Medium and High options will be available. Set according
Dialogue
your preference.
Enhancement
Note: This feature has an effect only if input audio format is AC-4 and this effect only applies to TV
loudspeaker output.
Default preference of spoken subtitles is selected with this setting option. To make
Spoken Subtitles spoken subtitles priority higher than normal ones, this option should be set to On. This
option may not be available depending on the model of your TV.
Enables the use of button combinations to magnify the screen. On and Off options
will be available. Set as On to enable.
Magnification support will be enabled or disabled with long-press of the numeric button
Magnification
. First top-left quadrant of the screen will be zoomed. After the magnification support
is enabled, long-press of the numeric buttons 2, 4, 6, 8 will move the zoomed area to
up, left, right and down.
Minimap is enabled and deactivated by default. It will be activated when Magnification
Minimap feature is enabled. With this option, you can prevent magnification feature from displaying
the minimap.
Click Sound
This option enables the key click sound on TV menu. Set to On to enable.
Highlight
programmes with
If this option is enabled and if any electronic programme guide event has "Subtitle" access
[S] Subtitle
service, these events will be highlighted with another colour.
[SL] Sign
If this option is enabled and if any electronic programme guide event has "Sign Language"
Language access service, these events will be highlighted with another colour.
[AD] Audio
If this option is enabled and if any electronic programme guide event has "Audio
Description Description" access service, these events will be highlighted with another colour.
Language
You may set a different language depending on the broadcaster and the country.
Conditional Access Controls conditional access modules when available.
Privacy
Manage your privacy privileges for smart TV related applications. Press OK to enter
Privacy Settings
the menu and set according to your preferences.
Delete All Coo-
You can set your preference regarding the tracking behaviour for HbbTV services
Do Not Track
using this option.
English - 23 -