Features; Ultra Hd (Uhd); High Dynamic Range (Hdr) / Hybrid Log-Gamma (Hlg); Dolby Vision - Horizon 9-Serie Nutzerhandbuch

Features

Remote controlled colour TV
Fully integrated digital terrestrial/cable/satellite TV
(DVB-T-T2/C/S-S2)
HDMI inputs to connect other devices with HDMI
sockets
USB input
OSD menu system
Stereo sound system
Teletext
Headphone connection
Automatic programming system
Manual tuning
Automatic power down after up to eight hours.
Sleep timer
Child lock
Automatic sound mute when no transmission.
NTSC playback
AVL (Automatic Volume Limiting)
PLL (Frequency Search)
Game Mode (Optional)
Picture off function
Programme recording
Programme timeshifting
Ethernet (LAN) for Internet connectivity and service
802.11 a/b/g/n built in WLAN Support
Audio Video Sharing
HbbTV

Ultra HD (UHD)

TV supports Ultra HD (Ultra High Definition - also
known as 4K) which provides resolution of 3840 x
2160 (4K:2K). It equals 4 times the resolution of Full
HD TV by doubling the pixel count of the Full HD
TV both horizontally and vertically. Ultra HD content
is supported via native and market applications,
HDMI, USB input(s) and over DVB-T2 and DVB-S2
broadcasts.
High Dynamic Range (HDR) / Hybrid Log-Gamma
(HLG)
Using this feature the TV can reproduce greater
dynamic range of luminosity by capturing and then
combining several different exposures. HDR/HLG
promises better picture quality thanks to brighter, more
realistic highlights, more realistic colour and other
improvements. It delivers the look that filmmakers
intended to achieve, showing the hidden areas of
dark shadows and sunlight with full clarity, colour
and detail. HDR/HLG content is supported via native
and market applications, HDMI, USB inputs and over
DVB-S broadcasts. Set the related HDMI source
input as Enhanced from the Sources option in the
Settings>System menu or from the Sources>Source
Settings menu in order to watch HDR/HLG content,
if the HDR/HLG content is received through an HDMI
input. The source device should also be at least HDMI
2.0a compatible in this case.

Dolby Vision

Dolby Vision™ delivers a dramatic visual experience,
astonishing brightness, exceptional contrast, and vivid
colour, that brings entertainment to life. It achieves this
stunning image quality by combining HDR and wide
colour gamut imaging technologies. By increasing the
brightness of the original signal and using a higher
dynamic colour and contrast range, Dolby Vision
presents amazing true-to-life images with stunning
detail that other post-processing technologies in the TV
aren't able to produce. Dolby Vision is supported via
native and market applications, HDMI and USB inputs.
Set the related HDMI source input as Enhanced from
the Sources option in the Settings>System menu or
from the Sources>Source Settings menu in order to
watch Dolby Vision content, if the Dolby Vision content
is received through an HDMI input. The source device
should also be at least HDMI 2.0a compatible in this
case. In the Settings>Picture>Mode menu two pre-
defined picture modes will be available if Dolby Vision
content is detected: Dolby Vision Bright and Dolby
Vision Dark. Both allow the user to experience the
content in the way the creator originally intended with
different ambient lighting conditions.

Accessories Included

Remote Control
Batteries: 2 x AAA
Operating Instructions

OLED TV Operations

OLED panels have some procedures in order to extend
the panel lifetime and provide protection from image
sticking problem.
OLED Fast Panel Clean
After every 4 hours of use, the TV will perform OLED
Fast Panel Clean operation automatically when next
time the TV is switched into standby mode. If the TV
is in Store Mode this operation will be performed
every time the TV is switched into the standby mode.
It will take about 6 minutes. In order not to interrupt
the operation it is recommended to wait until the
operation is completed.
The LED will be blinking during the operation.
When the operation is complete, the TV will switch
into standby mode.
English - 4 -
This operation can be interrupted by cutting the
power supply to the TV or switching the TV on. In
this case OLED Fast Panel Clean operation will
performed when next time the TV is switched into
standby mode.
This operation can be performed manually
using the OLED Fast Panel Clean option in the
Settings>Picture>Advanced Settings>OLED
Settings menu. In this case. This operation will take
about 10 minutes and then the TV will be switched
off automatically. Do not unplug the mains lead
during this period.
ON-RF
This operation will be performed automatically every
time the TV is switched on.
Do not do anything during boot-up procedure. Do
not interrupt the process.
It will take about 6 seconds for the first picture to
appear on the screen.
If any available, the boot logo will thus appear later
and will remain for a lesser period of time on the
screen.
OLED Panel Noise Clean
This operation will be performed automatically at any
time of the day when the TV is switched into standby
mode after every 1500 hours of use.
First, OLED Fast Panel Clean operation will be
performed when the TV is switched into standby
mode.
Then the TV will remain in standby mode for a period
of 1 hour in order to cool down the panel.
After a period of 1 hour in standby mode the TV will
switch on with blank screen and OLED Panel Noise
Clean function will be performed if the panel is at
proper temperature.
This will take about 1 minute and during the operation
the LED will blink and a horizontal line will appear
on the screen, moving from the top to the bottom
of the screen.
After OLED Panel Noise Clean operation is
completed the TV will switch into standby mode.
OLED Panel Noise Clean operation can be
interrupted at any time by cutting the power supply
to the TV or switching the TV on.
If OLED Panel Noise Clean operation is interrupted
a massage will appear on the screen stating that
the OLED Panel Noise Clean operation was
interrupted when next time the TV is switched on.
In this case OLED Panel Noise Clean operation
will be performed when next time the TV is switched
into standby mode.
This operation can be performed manually using
the OLED Panel Noise Clean option in the
Settings>Picture>Advanced Settings>OLED
Settings menu. This operation will take about 1 hour
and then the TV will be switched off automatically.
Do not unplug the mains lead during this period. It
is not recommended to perform this operation more
than once a year or unless requested by authorised
service personnel.
OLED Pixel Shift
The images will be automatically shifted by one pixel
every three minutes to prevent image sticking.
You can change the pixel shifting setting using the
OLED Pixel Shift option in the Settings>Pictu-
re>Advanced Settings>OLED Settings menu. Half
and Full options will be available.
The image on the screen will be shifted horizontally
and vertically, following a rectangular-shaped orbit.
If the OLED Pixel Shift option is set to Full, the orbit
will be twice as big compared to the Half option.
Other Precautions
There are also some other precautionary measures
to prevent image sticking.
A screensaver feature is embedded to prolong
the display panel's lifetime. It will be activated
automatically if the TV detects that a static image is
displayed on the screen after a period of idle time
(approximately seven minutes). Press any button on
the remote to exit screensaver mode.
The Menu Timeout option in the Settings>Sys-
tem>More menu can not be set to Off.

Standby Notifications

If the TV does not receive any input signal (e.g. from
an aerial or HDMI source) for 3 minutes, it will go
into standby. When you next switch-on, the following
message will be displayed: "TV switched to stand-by
mode automatically because there was no signal
for a long time." You can disable this functionality by
setting the No Signal Timer option in the Settings>
System>Device Settings menu accordingly.
The Auto Power Down option (in the Settings>System
>More menu) could have been set to a value between
1 and 8 hours by default. If this setting is not set as Off
and the TV has been left on and not been operated
during the set time, it will switch into standby mode
after the set time has expired. When you next switch-on
the TV, the following message will be
switched to stand-by mode automatically because
no operation was made for a long time." Before the
TV switches into standby mode a dialogue window will
be displayed. If you do not press any button the TV
will switch into the standby mode after a waiting period
of about 5 minutes. You can highlight Yes and press
OK to switch the TV into standby mode immediately.
If you highlight No and press OK, the TV will remain
on. You can also choose to cancel the Auto Power
English - 5 -
displayed: "TV