Important Safety Instructions - EuroLite HALF MIRROR BALL serie Bedienungsanleitung

Please read the safety warnings carefully and only use the product as described in this manual to avoid
accidental injury or damage.
Intended use
• This mirror ball is used in connection with adequate illumination to create decorative indoor lighting effects. The
mirror ball is designed for ceiling mounting and driven by a motor. This product is designed both for private and
professional use in the field of event technology, e.g. in discos. Only use the product according to the instructions
given herein. Damages due to failure to follow these operating instructions will void the warranty! We do not
assume any liability for any resulting damage.
• Unauthorized rebuilds or modifications of the product are not permitted for reasons of safety and render the
warranty invalid.
Warning – risk of injuries
Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down! Make sure that the
mirror ball is installed securely and cannot fall down. The installation should be carried out by a
specialist who is familiar with the hazards and the relevant regulations.
• If you lack the qualification, do not attempt the installation yourself, but instead use a professional installer.
Improper installation can result in bodily injury and or damage to property.
• The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety
precautions.
• For commercial use the country-specific accident prevention regulations of the government safety organization for
electrical facilities must be complied with at all times.
• If the mirror ball is to be operated above persons, additional risks arise. A hazard analysis based on the location
and application must be performed in order to ensure dimensioning and measures for a safe operation. The
mirror ball meets the professional association safety regulations regarding safety and operation.
• The operator has to make sure that the installation is approved by a specialist before taking into operation for the
first time, after changes, and at reqular intervals.
• Make sure that the area below the installation place is blocked when rigging, derigging or servicing the device.
• When handling mirror balls always wear gloves. Observe the danger of cutting and splintering by glass!
• Make sure that no side forces can impact on the installation and the rotation of the mirror ball is never slowed
down or stopped by decoration material etc.
Danger to children and people with restricted abilities
• This product is not a toy. Keep it out of the reach of children and pets. Do not leave packaging material lying
around carelessly. Never leave this device running unattended.
• This device may be used only by persons with sufficient physical, sensorial, and intellectual abilities and having
corresponding knowledge and experience. Other persons may use this device only if they are supervised or
instructed by a person who is responsible for their safety.
Danger due to electricity
• The device is suitable for indoor use only. Do not use it outdoors. Never expose it to rain or moisture. Do not store
it in rooms exposed to moisture.
• To reduce the risk of electric shock, do not open any part of the device. There are no serviceable parts inside the
device.
• Only connect the device to a properly installed mains outlet. The outlet must be protected by residual current
breaker (RCD). The voltage and frequency must exactly be the same as stated on the device. If the mains cable
is equipped with an earthing contact, then it must be connected to an outlet with a protective ground. Never
deactivate the protective ground of a mains cable. Failure to do so could possibly injure the user.
• The mains outlet must be easily accessible so that you can unplug the device quickly if need be.
• Never touch the mains plug with wet or damp hands. There is the risk of potentially fatal electric shock.
• The mains cable must not be bent or squeezed. Keep it away from hot surfaces or sharp edges.
• Never pull the mains cable to disconnect the mains plug from the mains outlet, always seize the plug.
• Unplug the device during lightning storms, when unused for long periods of time or before cleaning.
• Do not expose the device to any high temperatures, direct sunlight, dripping or splashing water, strong vibrations
or heavy mechanical stress. The admissible ambient temperature range is -5 to +45°C.

IMPORTANT SAFETY INSTRUCTIONS

WARNING!
WARNING!
9 • EN