Single Measurement; Measuring Blood Pressure - Fora Diamond CUFF BP Bedienungsanleitung

Important!
If the cuff is relatively lower (higher) than the heart, the obtained
blood pressure value could be higher (lower) than the actual
value. A 15 cm difference in height may result in an error around
10 mmHg.
4. Press the Power button.
The device will turn on and the cuff will begin to inflate
automatically. Remain still and do not talk or move during the
measurement.

Measuring Blood Pressure

This device provides you different ways to measure your blood
pressure.
When the device detects an irregular heart beat, the IRB symbol is
shown as " " instead of "
consult your doctor.
" . If the problem still persists, please
Important!
Always apply the pressure cuff before turning on the device.
A. Single Measurement
Perform an individual blood pressure measurement.
1. Press the Power button. All the LCD symbols will appear. Then the
cuff will begin to inflate automatically.
Note:
• When the device is connected to your mobile device (via
Bluetooth),you can also initiate the measurement by tapping
.
• The cuff will begin inflate automatically.
2. The heart symbol "
the inflation.
EN-5
" will flash when a pulse is detected during