Fora Diamond CUFF BP Bedienungsanleitung Seite 8

After the measurement, the monitor displays the systolic pressure,
diastolic pressure and pulse rate.
3. Press the Power button to turn the device off.
Note:
• If the device is left idle for 3 minutes, it will turn off automatically.
B. Average Measurement (via APP)
Automatically performs three (3) consecutive blood pressure
measurements and displays the average result in the end. This
function is only available when your Diamond CUFF BP is connected
to your mobile device.
1. Press the Bluetooth button. The "
display, indicating that the device is ready to transmit data.
Important!
Be sure the device is properly connected to your mobile device
via Bluetooth.
" icon will appear on the
EN-6
2. Launch iFORA BP app. The main screen appears on the mobile
device's screen.
3. Set Average Mode to ON and tap
will begin to inflate automatically.
4. After the first measurement is complete, the device and iFORA
BP app will start counting down before the second measurement
begins. The device will take three (3) measurements consecutively
with an interval of 20 seconds.
. Then the cuff