Fixing The Bottom Joint Protector; Installing The Vertical Support - Swim & Fun 2900 Bedienungsanleitung

UK
Note
Make sure that you place the longer side of the top platform facing out and the shorter side
facing inside the pool.
12
14
20
Line up the screw holes and lightly fasten with
the bolts provided in the package. (See dia-
gram 23).
Repeat these steps for all top platforms and
make sure they are all mounted properly be-
fore finally tightening all the nuts.

11. Fixing the bottom joint protector

Fix the bottom joint protector to the vertical supports, using the ST4.2x13 screws (No.20) as shown
in diagram 24.
12. Installing the vertical supports
The first vertical support should be placed over the joint of the steel wall. Fix the vertical support
onto the metal pieces as shown in diagram 25,26, 26A & 26B. Line up the bolts.
106
MV-2900-2901-2902-2903-2930-2931-2932-2933-08-2021 . © All rights reserved Swim & Fun A/S
18
8 21
22
17