Maintenance and servicing
Important safety notes
After use
Trouble shooting
WARNING!
Only carry out maintenance as described in the operating instructions.
Always leave servicing and repair work, especially the rectification of electrical
faults to authorised service agents.
ATTENTION!
The use of wrong or faulty spare parts from other manufacturers may result in dam-
age to the appliance.
Only use original spare parts of the manufacturer.
WARNING!
The power plug should always be withdrawn before cleaning or servicing the ma-
chine.
• Rinse out the dirt water tank.
• Clean the roller brush and spray nozzles.
ATTENTION!
When fitting nozzles, they should be positioned parallel to the brush.
Machine does not run
Poor suction
No water
Maintenance and servicing
Power plug not plugged-in properly.
Check if fuse has blown or a circuit-
breaker has tripped.
Check seating of tank cover and vacuum
hose.
Check whether vacuum hose is blocked
and clear if necessary.
Check whether spray nozzles are blocked
and clear if necessary.
31