Conduct In The Case Of Danger Or Accidents; Transport, Packaging And Storage; Safety Instructions; Transport Inspection - Nilco SE-BA T 490 Bedienungsanleitung

Transport, Packaging and Storage

Conduct in the case of danger or
accidents
Transport, Packaging and Storage

Safety instructions

Transport inspection

Packaging

Storage

24
Where there is danger or if an accident occurs, immediately stop the appliance by
switching it off at the control panel and secure it against rolling away (see chapter
"Operation").
Ensure that first-aid equipment (first-aid box, eye lotion, etc.) and a fire extinguisher
are available nearby.
Staff must be made aware of the procedures to be followed and location of safety
equipment, alarm buttons, first-aid boxes and rescue equipment. This will ensure
prompt action in the case of accidents or if dangers occur.
WARNING! Risk of injury!
During transportation or during loading and unloading there is a risk of injury from
falling parts. The appliance may be damaged or destroyed if transported in the
wrong way. For this reason the following safety instructions should be observed:
•
Never transport loads above people's heads.
•
Always take great care when moving the appliance.
•
Never lift the appliance by sticking out mechanical parts such as shafts.
•
For transportation in elevators, the pertinent applicable user instructions and
safety regulations, in particular concerning the loading capacity, must be ob-
served.
We recommend that you check the whole delivery for completeness and possible
transport damage as soon as it arrives. Where damage is suspected, only condition-
ally accept the goods (e.g. on the delivery papers), giving details of the suspected
damage. Contact the manufacturer immediately.
The most commonly used packaging materials are wood, cardboard and plastic (foil
and expanded polystyrene), but other packing materials such as tightening straps
may also be used. Packaging materials may also include materials to protect the
goods against moisture or frost (e.g. silica gel bags, antifreeze, etc.)
Unless otherwise agreed that the packaging material should be returned, the packag-
ing materials remain with the customer.
ATTENTION!
Environmentally friendly disposal conform to the relevant environmental protection
regulations must be assured. If necessary, a specialized recycling firm should be
given the task of disposing of the packaging material.
After unloading, the packages must be stored in accordance with the relevant mark-
ings on the outside ready for assembly.
For storage the following rules apply:
• Store in a dry place. Relative humidity: max. 60 %
• The packages must not be stored outside in the open air. Furthermore it must be
guaranteed that the warehouse floor remains dry during the storage period.
• Protect packages against direct sunlight. Storage temperature: 15 to 25 °C
• Store in dust-free surroundings.
• Avoid mechanical vibration and damage.
• If storage lasts more than about 3 months, check that the protective measures
taken are sufficient. In aggressive surroundings the protective measures may have
to be renewed.