Device Description; Control Panel; Initial Use - Beurer MP 38 Gebrauchsanweisung

2. Device description

1. Selection switch
2. Start button
1

3. Initial use

• Check to ensure that the package contains all the parts that should be included in the delivery. If any parts are
missing or damaged, contact Customer Services.
• Remove all packaging material.
Warning
Keep packaging material away from children! Choking hazard.
• Place the device on a firm, level and dry surface.
Before you can begin using the UV nail dryer, you must insert the UV fluorescent tubes.
In order to do this, follow the steps below:
1. Remove the base plate.
3. Insert the base plate.
2
2. Carefully insert the fluorescent tubes into the sockets.
Ensure that the brass terminals are correctly inserted.
9

Control panel

1. 120-second timer
2. Off
3. Continuous operation
Timer On
1
2
3
Important