Scope Of Delivery; Description Of The Pump - WITA go.future Z+ Original Einbau- Und Betriebsanleitung

Operating instruction
Temperature sensor control
range
Maximum system pressure
Minimum inlet water pressure
Approved pumping media
Dimensions
Weight
Connections
Attention!
Impermissible fluids can destroy the pump and cause personal injury.
It is essential to take the manufacturer's information and safety data
sheets into account!
5.2

Scope of delivery

• Original installation and operating instructions
• Pump
• 2 flat gaskets
• Insulation
• Power plug
• Temperatur sensor (For pipe diameters DN 15, Cable length approx 90 cm)

6 Description of the Pump

In an average household, around 10 to 20% of the energy consumption is caused by common
standard pumps. The go.future Z+ pump can reduce energy consumption by up to 80% compa-
red to a standard circulation pump, whilst maintaining the same level of hydraulic power.
28
WITA go.future Z+
+20 °C to +60 °C
10 bar (1 MPa)
0,005 MPa
clean drinking water up to < 20° dH
particle-free, fiber-free and pH-neutral
81 mm x 81 mm x 131 mm (L x B x H)
1,2 kg
IG ½"
Note