Herunterladen Inhalt Inhalt Diese Seite drucken

Disposal; Incorrect Measurement; Technical Specifications; Warranty - Beurer BG 13 Gebrauchsanweisung

Diagnosewaage
Vorschau ausblenden Andere Handbücher für BG 13:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3

8. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful
life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accord-
ance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions,
please contact the local authorities responsible for waste disposal.
The empty, completely flat batteries must be disposed of through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to dispose of the batteries.
The codes below are printed on batteries containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.

9. Incorrect measurement

If the scale detects an error during weighing, "
If you step onto the scale before "0.0" appears in the display, the scale will not operate properly.
Possible causes of errors
– The maximum load-bearing capacity of 150 kg was
exceeded.
– Not standing still.
– The electrical resistance between the electrodes
and the soles of your feed is too high (e.g. with
heavily callused skin).
– Your body fat lies outside the measurable range
(less than 5% or greater than 80%).
– The proportion of water is outside the measurable
range (less than 43% or greater than 75%).

10. Technical specifications

Model:
Dimensions:
Weight:
Measurement range:
Scale interval d:
Repetition accuracy:
Absolute precision:
Subject to technical changes.

11. Warranty

Further information on the warranty and warranty conditions can be found in the warranty leaflet supplied.
2" or "
BG 13
30 x 30 x 1.8 cm
1549 g
5-150 kg
The display can be read in increments of 0.1 kg.
The measuring tolerance for repeated measurements is +/- 0.4 kg (several
measurements in direct succession on the same scale with position of scale and
person the same as far as possible).
In comparison with a calibrated weight, the measured value is +/- (1% + 0.1kg),
e.g. at 40 kg this corresponds to +/- 0.5 kg; at 100 kg this corresponds to +/- 1.1
kg.
" appears in the display.
Remedy
– Only weigh the maximum permissible weight.
– Stand as still as possible.
– Repeat weighing barefoot.
– Slightly moisten the soles of your feet if necessary. Re-
move the calluses on the soles of your feet if necessary.
– Repeat weighing barefoot.
– Slightly moisten the soles of your feet if necessary.
– Please repeat the measurement barefoot.
– Dampen the soles of your feet slightly.
17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis