Snapper ESXD19SPWM82 Bedienungsanleitung Seite 8

EN
AR BG CS DA DE ES ET FI FR HR HU IT LT LV NL NO PL PT RO RU SK SL SR SV TR UK
■ Objects struck by the lawn mower blade
can cause severe injuries to persons.
Thoroughly inspect the area where the
machine is to be used and remove all
rocks, sticks, metal, wire, bones, toys, or
other foreign objects.
■ Do not operate the machine in wet grass
or in the rain.
■ Keep in mind that the operator or user
is responsible for accidents or hazards
occurring to other people or their property.
GARDEN TOOLS USE AND CARE
■ Before using, always visually inspect to
ensure blades, blade bolts, and cutter
assembly are not worn or damaged.
■ Replace worn or damaged blades and
bolts in sets to preserve balance.
■ Check all nuts, bolts, and screws at
frequent intervals for proper tightness to
be sure the equipment is in safe working
condition.
■ Check the grass catcher frequently for
wear or deterioration.
■ Replace worn or damaged parts.
■ Do not leave the battery in the mower in
direct sunlight.
■ Do not force the machine. It will do the
job better and safer at the speed for
which it was designed.
■ Do not overload your mower. Mowing
long thick grass may cause the motor
speed to drop, or the power to cut out.
When mowing in long thick grass a first
cut with the cutting height set higher will
help reduce the load.
■ Stop the blade when crossing gravel
surfaces.
■ Do not pull the mower backward unless
absolutely necessary. If you must
back the machine away from a wall or
obstruction, first look down and behind
to avoid tripping or pulling the machine
over your feet.
■ Stop the blade(s) if the machine has
to be tilted for transportation when
crossing surfaces other than grass, and
when transporting the machine to and
from the area to be mowed.
English (original instructions)
■ Never operate
defective guards or shields, or without
safety devices, for example, deflectors
and/or grassboxes, in place.
■ Switch on the motor according to
instructions and keep hands and feet
away from cutting area.
■ Never pick up or carry a lawnmower
while the engine is running.
■ Remove switch key for the below cases:
● whenever you leave the machine
● before cleaning a blockage
● before checking, cleaning or working
on the machine
● after striking a foreign object; inspect
the appliance for damage and make
repairs as necessary
● before clearing the grassbox
● if the machine starts to vibrate
abnormally (check immediately)
● when not in use and storing the
machine
● when recharging
inserting battery pack.
■ Avoid holes,
property stakes, or other hidden objects.
Uneven terrain could cause a slip and
fall accident.
■ If the machine should start to vibrate
abnormally, stop the motor and check
immediately for the cause. Replace the
blade if it is unevenly worn or damaged
in any way. Vibration is generally a
warning of trouble.
■ If the machine strikes a foreign object,
follow these steps:
● Stop the machine by releasing the
power lever, wait until the blade
comes to a complete stop, and then
remove switch key.
● Thoroughly inspect the machine for
any damage.
● Replace the blade if it is damaged in
any way. Repair any damage before
restarting and continuing to operate
the mower.
● Use the right appliance. Do not use
the machine for any job except that for
which it is intended.
■ When not in use, mower should be
2
the machine
and removing/
ruts, bumps, rocks,
with