Chapter 3 - Quick Start Up; Operation Using Keypad - LG SV008iS5-2 Bedienungsanleitung

3.1 Operation using Keypad

1. Apply AC power.
2. LCD: Press ▲ key three times.
7-Seg: Rotate the encoder knob until '03' is
displayed.
3. LCD: Press PROG key.
7-Seg: Press PROG/ENT key.
4. LCD: Press ▼ key one time.
7-Seg: Rotate the encoder knob left.
5. LCD: Press PROG key.
7-Seg: Press PROG/ENT key.
6. Press PROG/ENT key.
7. LCD : Press PROG key.
7-Seg : Press PROG/ENT key.
8. LCD: Press SHIFT/ESC key and press ▲
key to increase the command frequency.
7-Seg: Rotate the encoder knob right to
change the command frequency.
digit moves by pressing the
9. LCD: Press ENT key to save the data.
7-Seg: Press PROG/ENT key to save the
data.
10. LCD: Press FWD or REV key to start motor.
7-Seg: Press RUN key to start motor.
11. Press STOP/RESET key to stop motor.
All manuals and user guides at all-guides.com
DRV►T/K
00
DRV► Drive mode
03
DRV► Drive mode
03
DRV► Drive mode
03
DRV► Drive mode
03
DRV►K/K
00
DRV► Cmd. freq
00
DRV► Cmd. freq
00
The changing
SHIFT/ESC
key.
DRV►K/K
00
The FWD or REV LED starts blinking.
The STOP/RESET LED starts blinking. The STOP/RESET LED starts blinking.
LCD Display
0.0 A
STP 0.00Hz
Fx/Rx-1
Fx/Rx-1
Keypad
Keypad
0.0 A
STP 0.00Hz
0.00Hz
60.00Hz
0.0 A
STP 60.00Hz
32

Chapter 3 - Quick Start Up

7-Segment Display
The DRV LED is ON.
The DRV LED is turned ON.
The PROG/ENT LED turned ON.
The PROG/ENT LED is turned ON.
The PROG/ENT LED is turned ON.
The PROG/ENT LED is turned ON.
The RUN LED starts blinking.
To change the motor running
direction, change DRV 13 to '1'.