Troubleshooting And Maintenance; Troubleshooting; Power Cut - Veripart VPTMKV85 Bedienungsanleitung

TROUBLESHOOTING AND MAINTENANCE

TROUBLESHOOTING

Power cut

Do not open the fridge door more than necessary.
The fridge is exceptionally cold
You may have accidentally adjusted the thermostat control dial to a
higher position.
The fridge is exceptionally warm
The compressor may not be working. Turn the thermostat control dial to the
maximum setting and wait a few minutes. If there is no humming noise, it is
not working. Contact the store where your purchase was made.
The fridge is not working
Check it is plugged in and switched on. Check that the fuse in the plug has
not blown. The fridge should be placed in a well-ventilated room with an
ambient temperature between 16°C and 38°C. Leave the fridge
for 30 minutes.
Condensation appears on the outside of the fridge
This may be due to a change in the room temperature. Wipe off any residual
moisture. If the problem continues, contact the store where your purchase
was made.
Gurgling, whooshing
These noises are caused by the circulation of the refrigerant liquid in the
cooling system. It has become more pronounced since the introduction of CFC
free gases. This is not a fault and will not affect the performance of
your fridge.
39