Klarstein ELBRUS 10037971 Bedienungsanleitung Seite 27

• In this case, the additional fixings and dowels should be of the same size and
type as those supplied.
• If the unit is to be mounted on drywall or timber frame wall, try to mount it in
a vertical position in one of the timber studs or load-bearing timber members
of the wall using the mounting screws provided. If this is not possible, the wall
should be reinforced with suitable building materials.
WARNING
Danger of injury and possible damage to property due to
insufficient load-bearing capacity! The wall on which the unit is to
be installed must be able to support the total load of the unit
permanently. Additional measures should be taken to ensure
sufficient stability to withstand the force of earthquakes, vibrations
and other external impacts. Plasterboard alone is not considered a
load-bearing material. It is not recommended to rely solely on
plasterboard fixings to support the weight of the unit.
EN
27