Care And Maintenance - Mapal HTC Kurzanleitung

5

Care and maintenance


Protect the HTC clamping chuck against corrosion when stored.

Ensure the HTC clamping chuck is stored in the unclamped position.

The clamping screw is to be cleaned and re-lubricated at regular intervals depending on
usage and the ambient conditions.

If the axial tool length setting screw is clamped frequently, it must be cleaned and lubri-
cated at regular intervals.

Repairs must only be performed at MAPAL.

Instructions for cleaning in a washing facility:
Only clean the clamping chuck in unclamped condition
-
Only clamp or unclamp the clamping screw at room temperature
-
The washing temperature must not exceed 100°C
-
After cleaning grease the clamping screw
-
34
All manuals and user guides at all-guides.com
MAPAL HTC Spannfutter / HTC Clamping Chuck
Kurzanleitung / Short manual