Maintenance; Environmental Protection - eta Torreo Bedienungsanleitung

GB
ERROR MESSAGES
Er1 – the top grill plate incorrectly inserted; check its position
Er2 – the bottom (grill base) grill plate incorrectly inserted; check its position
Er3 – the probe connector is not connected correctly, check that the connection is correct
Er4 – switch off the grill and disconnect it from the mains. Allow it to cool down completely,
making sure that the grill plates are positioned correctly and reconnect the grill and
turn it on.
V. MAINTENANCE
Clean the grill only after it has cooled down! Clean the appliance regularly after
every use by wiping with a wet soft cloth. Do not use rough and aggressive detergents
(e.g. sharp objects, caustic agents for cleaning ovens etc.).Do not use any
pressure-cleaning appliance (e. g. dishwasher, WAP, steam cleaners)! Remove possible
residues of fat and food that got stuck on the plates, using a common, plastic kitchen
turner. For easier cleaning, you can remove the plates from the grill shell as shown in
fig. 4 (do not wash them in the dishwasher); the plates can be washed in hot water with
detergent and then left to dry completely. Wipe the top and bottom part of the grill (located
under the grill plates) with a damp cloth and allow them to dry properly. Remove the drip
tray A5 as per Fig. 1, wash it in hot water with detergent and wipe it dry (you can use
a dishwasher). If the power cord with probe is soiled, wipe it with a wet cloth. It is normal
that the surface colour changes over the time. But the change does not alter the surface
properties in any way and the appliance is not subject to a complaint for this reason!
Storage
Make sure that the plates are cool before storage. Store the grill at a safe and dry place,
out of reach of children and incapacitated people. You can store the power cord in the
space at the bottom of the grill.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service! Failure to comply with
the instructions of the manufacturer will lead to expiration of the right to warranty
repair!
VI. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electric or
electronic products must not be disposed of together with municipal waste. For proper
disposal of the product, hand it over at special collection places where it will be taken
over free of charge. Suitable disposal of the product can help to maintain valuable natural
resources and to prevent possible negative impacts on the environment and human health,
which could be the possible consequences of improper waste disposal. Ask for more
details at the local authorities or in the nearest collection site. Fines can be imposed for
improper disposal of this type of waste in agreement with the national regulations.
If the appliance is to be put out of operation for good, after disconnecting it from power
supply we recommend cutting off the power cord and thus it will not be possible to use the
appliance again.
30 / 59