Herunterladen Inhalt Inhalt Diese Seite drucken

eta Torreo Bedienungsanleitung Seite 26

Elektrischer kontaktgrill
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 50
GB
IV. INSTRUCTIONS FOR USE
CONTROL
When the power supply A6 gets connected to the mains, you hear a beep and 'OFF' flashes
on the display. The grill is now in standby mode.
on / off switch A7 – When pressed in standby mode, the grill gets activated and begins
Control panel with display
– button to increase temperature / set time B1 – press / hold to increase temperature
– button to decrease temperature / set time B2 – press / hold to reduce temperature
– temperature setting button B3 – press to activate the grilling temperature setting
Grilling temperature B15 – shows the set temperature within the range of 80 - 240 °C.
– time setting button B4 – press to activate the time setting option - the time B14 (set
Grilling time B14 – displays time of grilling within the range of 0 – 60 M (minutes). After the
set time has elapsed, you hear a beep. However, the grill will continue
to be hot.
– temperature probe button B11 – press to activate the temperature monitoring
Probe temperature indicator B12 – displays the probe temperature reached. As soon as all
Set probe temperature B13 – displays the pre-set temperature that can be measured inside
to heat the grill plates to the pre-set 200 °C. At the same time, the
display indicates the time (default: 00 M)
option. Use B1 / B2 to set the temperature in 5 °C
increments.
If a pre-set programme is active, the temperature setting range
is limited to the given ingredient. If the set temperature flashes,
the grill is heating up to the given temperature. As soon as
the grill reaches the set temperature, you hear a beep and the
temperature value remains on.
to 30 M) starts flashing. Use buttons B1 and B2 to change it
within 3 seconds. The confirmation of the set time is signalled
by a beep and a steady light of the given value.
of cooked ingredients by a temperature probe.
The display shows 'probe temp' indicating this
function is active. Press again to turn it off.
indicator fields light up, the set temperature has been
reached and is displayed at position B13.
ingredients by a temperature probe (45-75 °C)
or time
or time
26
/ 59

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Eta715590001579713682

Inhaltsverzeichnis