Symbols In The Operating Instructions; Proper Use; Residual Risks; Electrical Safety Advices - ATIKA ALE 500 Originalbetriebsanleitung

S y m b o l s i n t h e o
S y m b o l s i n t h e o
i n s t r u c t i o n s
i n s t r u c t i o n s
Potential hazard or hazardous situation. Failure to
observe these instructions may lead to injuries or
cause damage to property.
Important information on proper handling. Failure
to observe these instructions may lead to
malfunction.
User information. This information helps you to use
this machine optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
P r o p e r u s e
P r o p e r u s e
This air dehumidifier is only designed for indoor use to dry
moist walls damage caused by water or to reduce the air
humidity in confined spaces.
The intended usage also includes compliance with the
operating, servicing and repair conditions prescribed by the
manufacturer and following the safety instructions included in
the instructions.
Follow the relevant accident prevention rules for operation and
other generally recognised health and safety at work rules.
Any other use is deemed not to be use as prescribed. The
manufacturer is not liable for any type of damage resulting
from this: the user bears the sole risk.
Unauthorised modifications on the air dehumidifier exclude a
liability of the manufacturer for damages of any kind resulting
from it.
R e s i d u a l r i s k s
R e s i d u a l r i s k s
Even if used properly, residual risks can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety advices" and
the "Intended usage" as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will
reduce the risk of personal injury or damage to the equipment.
• Risk from electricity when using improper electrical
connections.
• Touching live parts of opened electrical components.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
12
p e r a t i n g
p e r a t i n g S a f e t y a d v i c e s
S a f e t y a d v i c e s
Before commissioning this product, read and keep to the
following advice. Also observe the accident prevention
rules of your professional association and the safety
provisions applicable in the respective country, in order
to protect yourself and others from possible injury.
Pass the safety instructions on to all persons who
work with the machine.
Keep these safety instructions in a safe place.
Make yourself familiar with the equipment before using it,
by reading and understanding the operating instructions.
Only use this machine for the intended purpose for which it
is designed (see "Proper use").
Only start up this machine with the specified mains
voltage.
Within his area of work the operator is responsible for third
parties.
The machine must not be operated by children or young
people under 16 years of age. They are not aware of the
risks associated with the use of these devices.
Keep children away from the device.
Only operate the device with complete and correctly
attached safety equipment and do not alter anything on the
device that could impair its safety.
Do not switch on the device if it does not function properly
or was dropped causing damages to the cable or mains
powr plug or if another part shows signs of damage.
Only qualified persons are allowed to carry out repair work
on electrical equipment. The user of the device may be
severly injured due to improper repair work.
Switch off the device and disconnect the mains plug if you
do not use the device or before you transport or clean it.
Switch off the device in case of faults, disconnect the
mains plug and contact the customer service.
Never dip the device in water or another liquid.
Do not place objects on the device.
Keep foreign objects away from air inlet/outlet openings.
Drain the water container before transporting the device to
prevent spills.
Do not tilt the device, otherwise outflowing water may
cause damages to the air dehumidifier.
Never pour or spray water on the device
Electrical safety
Use an extension cable in compliance with IEC 60245 (H
07 RN-F) having a core cross-section of at least:
1.5 mm for cable lengths up to 25 m
2
−
2.5 mm for cable lengths over 25 m
2
−
Long and thin connection lines result in a voltage drop. The
motor does not reach any longer its maximal power; the
function of the device is reduced.
Plugs and coupler outlets on connection cables must be
made of rubber, non-rigid PVC or other thermoplastic
material of same mechanical stability or be covered with
this material.