Cleaning The Cooling Unit And The Filling Chamber Screen; Cleaning The Cooling Unit And The Filling Chamber Screen With Rinsing Water - STORZ & BICKEL Mighty+ Gebrauchsanweisung

7.1.2 Cleaning the Cooling Unit and the Filling Chamber Screen

X Use Cleaning Brush and cotton swabs and paper or cotton cloths for
manual cleaning.
X Use warm rinsing water or isopropyl alcohol as a solvent.
X Clean the Filling Chamber Screen and the Screen of the Cooling Unit with
the Cleaning Brush after each vaporization.
7.1.2.1 Cleaning the Cooling Unit and the Filling Chamber Screen with
rinsing Water
X Place all parts in warm rinsing water for at least five minutes.
X Rinse all parts under running water for at least one minute.
X If necessary, clean the Cap Lock with warm rinsing water.
X Let all parts dry completely.
7 C L E A N I N G / H Y G I E N E
X Unscrew the Cooling Unit base from
the Vaporizer by turning it 90° coun-
terclockwise.
X Lever out the large Base Seal Ring
with Filling Chamber Tool at the re-
cess in the groove.
X Remove the small Base Seal Ring.
X Press the Screen with the Filling
Chamber Tool from the top to the
bottom out of the Cooling Unit base.
21