Caution!
Danger of injury: The following parts are hot or may become hot:
brew group
•
portafilter
•
body (upper part and side frames)
•
Handle expansion valve
•
3.2 Technical data
Voltages:
EU:
230 V
UK:
230 V
NZ:
230 V
AU:
230 V
US:
120 V
JP:
100 V
Power:
Water tank:
Measurements:
Measurements
with portafilter:
Machine tare weight:
Weight glass water tank:
4
MACHINE INSTALLATION
4.1 Preparation for installation
• Make sure the machine is placed on a water-resistant surface in case of water spillage or
leakage.
• Place the machine on an even and stable surface. You can regulate the height by
adjusting the feet of the machine.
• Never place the machine on hot surfaces.
4.2 Electrical connection
• Make sure the local main supply voltage corresponds to the information given on the type plate
under the espresso machine.
• Only use the connection cable supplied.
• Plug the machine into a grounded socket only
• Do not leave it unattended.
• Make sure that you use the correct power plug for your country.
• Do not roll or bend the power cord.
• Do not use an extension cord/ do not use a multiple socket.
5
FIRST USE
Read the instruction manual carefully before operating the machine.
Prior to starting the machine, check if:
the machine is switched off. (Power switch on the back of the machine is set to
•
to "0".)
the power cord is disconnected.
•
the drip tray is inserted accurately.
•
Translation of the German original user manual
Frequency:
1.000 W
approx. 2 litres
w x d x h / 195 mm x 348 mm x 315 mm
w x d x h / 195 mm x 358,5 mm x 395 mm
13.4 kg
0.5 kg
EU:
50 Hz
UK:
50 Hz
NZ:
50 Hz
AU:
50 Hz
US:
60 Hz
JP:
50/60 Hz
ENGLISH
21