Programming The Group Cleaning Mode "Cln; Programming The Eco-Mode - ECM Manufacture Puristika Bedienungsanleitung

4. Quickly press
- to decrease
+ to increase
the nominal temperature value.
5. Please wait a short while after having set the nominal temperature
value; 't1' will be displayed
The set temperature is accepted and you exit the menu.
6.3.3

Programming the group cleaning mode "CLn"

With the Puristika you have the option to program a reminder for next the group cleaning at the PID display.
The machine is set to 0 at the time of delivery, meaning no reminder is programmed yet.
Please take the following steps to program the cleaning reminder:
Press + and – at the same time and "t1" will appear on the display.
Press the – button until you reach "CLn". Press + to enter the CLn
menu.
Now you can carry out the programming in steps of 10 (0-200) by
pressing + and –.
In order to leave the programming mode, wait until "CLn" appears and
then press the – button.
For example, if you have programmed 90, you will be prompted with a
"CLn" on the display to clean the brew group after 90 brew cycles.
Clean the brew group (see 7.2 "Brew group cleaning").
We recommend cleaning the brew group after about 90 to 140 brew cycles. Only a brew over
15 seconds counted as a brew cycle.
If you operate the brew lever after "CLn" appears on the display, a counter
on the display counts from 10 to 1 per brew lever operation. The
temperature value is displayed and the programmed reminder value is
active again
6.3.4

Programming the ECO-Mode

The ECO-Mode gives you the option to set a timer that will automatically switch off your machine. After the
last brewing process, the machine will start the timer. The timer will be running in the background and is not
visible. When the timer ends the machine will automatically turn off. To reactivate the machine, either press
a PID key or switch the machine off and on again.
1. Switch on the machine.
2. Press + and – at the same time and "t1" appears on the display.
3. Press the – button until you reach "Eco". Press + to enter the Eco menu.
Translation of the German original user manual
ENGLISH
25