Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data; Machine Installation; Preparation For Installation; Electrical Connection - ECM Manufacture TECHNIKA V Profi PID Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

3.2 Technical data

Voltages:
EU: 230 V
UK: 230 V
NZ: 230 V
AU: 230 V
US: 115 V
JP: 100 V
1,200 W – 1,400 W
Power:
Measurements:
w x d x h / 325 mm x 475 mm x 390 mm
Measurements
with portafilter:
w x d x h / 325 mm x 580 mm x 390 mm
4

MACHINE INSTALLATION

The installation is to be carried out by qualified specialists and according to the following
instructions and in compliance with valid laws and local regulations.

4.1 Preparation for installation

• Place the machine on an even and stable surface.
• Make sure that the machine is on a water-resistant surface in case of water spillage or
leakage.
• Never place the machine on hot surfaces.

4.2 Electrical connection

• Make sure that the local main voltage supply corresponds to the information given on
the type plate on the front panel of the espresso machine.
• Make sure that you use the correct power plug for your country.
• Plug the machine into a grounded socket only and do not leave it unattended.
• Do not roll or bend the power cord.
• Do not use an extension cord / do not use a multiple socket.

4.3 Water supply connection

Important
Make sure that the machine is on a water-resistant surface in case of water spillage or
leakage.
Make sure that the fixed water connection of your machine is connected to a potable water
supply having an operating pressure ranging between 0 and 1.5 bars. We recommend to use
a pressure regulator and a shut-off valve in case the operating pressure exceeds 1.5 bars or
frequently fluctuates. The shut-off valve should be easily accessible, so that the water flow
may be stopped at any time.
Make sure that the shut-off valve is closed or turned off when the machine is not in use to
prevent any possible water leakage.
Caution!
High water pressure can result in damages to property and machine. Please make sure the
water pressure does not exceed 2 bar.
Position "0": water tank
waterconnection
Translation of the original German user manual
Frequency:
EU: 50 Hz
UK: 50 Hz
NZ: 50 Hz
AU: 50 Hz
US: 60 Hz
JP: 50/ 60 Hz
approx. 3.0 l
Water tank:
Weight:
28 kg
Position "1": direct
ENGLISH
24

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

85285

Inhaltsverzeichnis