Installation - Hama 00176553 Bedienungsanleitung

4. Product characteristics
This WiFi door / window contact is used to monitor (push
message to a smartphone on triggering) and check the
status of windows or doors (open / closed).
The following voice command can be used:
• Status check
"Alexa/OK Google, is my window / door open / closed?"
5. Getting started
5.1 Inserting / changing the batteries
• Press the button on the top of the larger sensor and
remove the cover on the back.
• Remove the spent batteries and dispose of them if
required. Insert two new batteries of type AAA. Take care
to ensure the correct polarity as shown in the diagram in
the battery compartment.
• Close the battery compartment by attaching the cover
back onto the rear of the larger sensor.

5.2 Installation

Warning
• Before mounting, check that the wall you have chosen
is suitable for the weight to be mounted. Also make
sure that there are no electric, water, gas or other lines
running through the wall at the mounting site.
• Do not mount the product above locations where
persons might sit or stand.
• We recommend attaching the sensor to the window
or door frame and securing the device directly to the
window / door.
• Ensure that the markings (triangles) of the device and
sensor are in a straight line and when the door / window is
closed are no more than 10 mm apart.
• You can either screw the device and sensor in place or
use adhesive pads.
3