Driving Instructions - SoFlow SO BIKE Originalbetriebsanleitung

4. Driving instructions

4.1 Display
The following information will be shown on the display
•
Battery level
•
Driving mode
•
Driving speed
•
Single trip mileage
•
Total mileage
•
Electronic control system error codes
While driving the display will show the following:
①
1. Support level and pushing mode: A total of 5 support levels, performance from low to high as follows: OFF, ECO, TOUR, SPORT, TURBO (OFF means no performance support))
2. Current speed and unit indicate the current driving speed;
3. Total mileage and unit: accurate to one decimal place, maximum 999.9 km;
② 4. The battery indicator shows 1-5 levels of power and undervoltage. The symbol flashes when the voltage is too low.
5. The headlight symbol is displayed when the headlight is installed and wired (front and rear lights must be purchased separately!).
③
④ ⑤
The shape and positioning of the buttons is shown in the following figure:
1. . Function key
4
2. Adjust button +
1
3. Adjust button -
2
3
4. On / Off
①②③④⑤⑥⑦⑧