Starting Operation; Maintenance And Service; Maintenance And Cleaning - Bosch HEAVY DUTY GAS 18V-1 Professional Originalbetriebsanleitung

Battery model GBA 18V...
LED
3 × continuous green light
2 × continuous green light
1 × continuous green light
1 × flashing green light
Battery model ProCORE18V...
LED
5 × continuous green light
4 × continuous green light
3 × continuous green light
2 × continuous green light
1 × continuous green light
1 × flashing green light
Recommendations for Optimal Handling of the
Battery
Protect the battery against moisture and water.
Only store the battery within a temperature range of −20 to
50 °C. Do not leave the battery in your car in the summer, for
example.
Occasionally clean the ventilation slots on the battery using a
soft brush that is clean and dry.
A significantly reduced operating time after charging indic-
ates that the battery has deteriorated and must be replaced.
Follow the instructions on correct disposal.
Assembly
Fitting the Extraction Accessories (see figure B)
Remove the battery before cleaning or performing
u
maintenance on the dust extractor, making tool ad-
justments, changing accessories or placing the dust
extractor in storage. This safety measure prevents the
dust extractor from being started accidentally.
The vacuum cleaner accessories can be directly connected
with the dust container (6).
See the illustration for the different ways of combining the
vacuum cleaner accessories.
– Insert the individual vacuum cleaner accessories firmly
into the connection on the dust container (6) and into one
another.
Bosch Power Tools
Operation
Remove the battery before cleaning or performing
u
maintenance on the dust extractor, making tool ad-
justments, changing accessories or placing the dust
Capacity
extractor in storage. This safety measure prevents the
60–100 %
dust extractor from being started accidentally.
30–60 %

Starting Operation

5–30 %
Before extraction, ensure that the filter unit is se-
u
0–5 %
curely fitted.
Do not use damaged filters (e.g. no cracks, small
u
holes, etc.). Replace any damaged filters immedi-
ately.
Switching on/off
Capacity
– To switch on the vacuum cleaner, press the on/off
button (3).
80–100 %
– To switch off the vacuum cleaner, press the on/off
60–80 %
button (3) again.
40–60 %
20–40 %

Maintenance and Service

5–20 %

Maintenance and Cleaning

0–5 %
Remove the battery before cleaning or performing
u
maintenance on the dust extractor, making tool ad-
justments, changing accessories or placing the dust
extractor in storage. This safety measure prevents the
dust extractor from being started accidentally.
To ensure safe and efficient operation, always keep
u
the dust extractor and the ventilation slots clean.
Clean the housing of the dust extractor occasionally with a
damp cloth.
Clean dirty charging pins using a dry cloth.
Emptying the Dust Container (see figure C)
Clean the dust container (6) after each use in order to en-
sure that the vacuum cleaner continues to perform optim-
ally.
– Hold the dust extractor over a suitable waste bin.
– Press the release button (7) to open the emptying
flap (8).
– Shake out the dust container (6).
– Close the emptying flap (8) in such a way that you can
hear it click into place.
– If necessary, empty the coarse dirt filter (1) and clean the
rotational airflow unit (17) as well as the filter (16).
Emptying the Coarse Dirt Filter (see figures D1–D2)
– Turn the coarse dirt filter (1) as far as it will go in the dir-
ection
– Shake out the coarse dirt filter and the dust container
over a suitable waste bin.
– Place the coarse dirt filter (1) in the dust container (6)
and turn it as far as it will go in the direction .
and remove it from the dust container (6).
1 609 92A 6TL | (07.09.2021)
English | 13