Electrical Parameters; Mechanical Data - schmalz FXP-i Kurzbedienungsanleitung

1 Main body
3 Insert element for optimizing the flow
5 Sealing plate
7 Silencer FXP-i
9 Suction cup connection strip with suction
cups
11 End cover
2.2 Connections
6
1 Compressed air connection
3 NFC area
5 Mounting holes for pentaprism

2.3 Electrical Parameters

Supply voltage
Polarity reversal
protection
Current consumption
(at 24 V)
NFC
IO-Link
1)
The power supply must correspond to the regulations in accordance with EN60204 (protected extra-low voltage).

2.4 Mechanical data

3 / EN
4
1)
DC 24 V ± 10% (PELV )
yes
-
FXP-i – xx – NC
FMP-i – xx – NO
NFC Forum Tag type 4
IO-Link 1.1 Baud rate COM2 (38.4 Kbits/s)
2 Sliding block strips
4 Valve film
6 Ejector assembly FXP-i (functional unit)
8 Valve assembly FMP-i (functional unit)
10 Hose connector FMP-i
12 Balls for SVK technology (not for SW)
3
5
2 M8 electrical connection, 6-pole
4 Connection for separation function
6 Marking
Typical current
consumption
50 mA
75 mA
2
1
Max. current
consumption
70 mA
115 mA
EN· 30.30.01.02952 · 00 · 07/21