Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Height rod Installation
1. Place the height measure with the holes at the back side onto the bolts at the front side of
the pillar, adjust the height rod downwards to the right position (Fig. 5-1).
2. Use the wrench to tighten the two hex-head screws. Do not over tighten the screws (Fig.
5-2).
3. Take the wrench away after tightening of the screws (Fig. 5-3).
M318800-210628-Rev004-UM-de-e-fr-es
15
Werbung
Inhaltsverzeichnis
