Storage Instructions - Medi Vario-Griff Butler Gebrauchsanweisung

English
smooth.
Please dispose of this product as soon as it shows signs of wear or
damage.

Storage instructions

Please store the medi Butler in a dry place and keep it out of direct
sunlight.
Use
Adjusting handle length for the medi Butler with variable handles
First, please adjust the handle so that it is at the right length for you.
To do this, loosen the four hexagon screws with the enclosed spanner,
until the length of the metal frame can easily be adjusted.
To find the right handle length for you, sit on a chair or the edge of the bed
and put the medi Butler with variable handles on the floor in front of you.
Now reach for a handle and pull it out of the frame until you can reach it
comfortably and easily
Fix this height immediately by retightening the screws using the spanner.
Please repeat this procedure for the second handle on the other side.
How do you put on your compression stocking using the medi Butler?
First, place the medi Butler on a firm base.
The wider side of the base of the Butler should be closest to you and the
opening of the semicircular shaft should be facing forwards.
Place the compression stocking in the step-in frame. The stocking toe
points away from you here.
Open out the end of the stocking and roll it over the shaft (Fig. 1).
Pull the stocking down over the step-in frame until the toe appears at the
edge of the frame (Fig. 2).
Tip: Use the medi fabric gloves or rubber gloves for this
Now place the medi Butler on the floor.
Slide your leg into the toe of the stocking, leading with your toe.