Assemble Processes - Modster Flash XL Betriebsanleitung

Assemble processes

1. Please take out the left, right and middle wing, wing connecting rod, accessory bag. Insert the connecting rod to the
middle wing, then connect the left and right wings to the middle wing. Connect the female plug from the middle wing to
the servo cables, then fix the wings with nylon screws.
2. Please take out the fuselage and horizontal wing, short wing connecting rod. Insert the short wing connecting rod into the
assembly holes from the rudder, then make the connecting rod insert into the left and right horizontals wings. Fix the wings
with screw.
3. Put the assembled main wings to the right position on the top of the fuselage, fix well the wings with screws to the fuselage.
4. Close the canopy, then the assembly finished.
�