Receiver Connection And Binding; How To Operate You Vehicle - Modster Vector SR48 Brushed Betriebsanleitung

Manual - Vector SR48 Brushed
Receiver conntection and binding
Binding is the process of programming the receiver to recognize the GUID (Globally Unique
Identifier) code of a single specific transmitter. When a receiver is bound to a transmitter, the
receiver will only respond to that one.
If you need to rebind for any reason, please follow these steps:
1. Switch the transmitter off
2. Power on the receiver, then turn on the transmitter within 5 seconds.
3. The receiver LED will flash 3-8 seconds to bind automatically.
4. The binding is done when the LED stops flashing.
How to operate Your Vehicle:
40
Push the trigger slightly away from you to go backward
(if with reverse function)
Pull the trigger towards you to go forward.
www.modster.at