Charging Instruction - Modster Vector SR48 Brushed Betriebsanleitung

Manual - Vector SR48 Brushed

Charging Instruction

For charging the included lithium battery, you can only use the included charger or suitably
compatible lithium battery charger. Charging the lithium battery using a none lithium
battery charger (such as NiCd or NiMH chargers), or even a different lithium battery charger
with the incorrect settings, may result in damage to the battery or even fire resulting in
property damage and/or personal injury.
Caution: You must be careful to ensure proper polarity bedore making the connection.
1. Power off your vehicle.
2. Carefully plug the charger into the USB port on
your computer or USB adaptor.
3. Connect the battery into the charger.
4. While charging, the red LED charge indicator will
be solid on. The charging process takes approx.
3.5 hours. For safety reason, never charge the
battery over 4 hours.
5. When the battery is fully charged, the green LED
charge indicator will be solid on.
Caution: Do not store the lithium battery fully charged.
For improved safety and longevity of the battery it's best to store it only partially charged for
any length of time. Storing the battery at approx. 50% charged (3.8V per cell) is typically best,
however it will take some careful management of the charge time and the use of a volt meter
to achieve this voltage.
If you have the equipment and skills to achieve the 50% charge level for storage it is
recommended. If not, simply be sure to not store the battery fully charged whenever possible.
In fact, as long as the battery will be stored at approx. room temperature and for no more than
a few weeks before next use, it may be best to store the battery in the discharged state after
the last drive (as long as the battery was not over-discharged).
www.modster.at 31