Manual - Vector SR48 Brushed
Dual Function
Adjust the servo angle by turning the switch up or down.
Turn the switch in upper position for larger servo angle.
Turn the switch in lower position for smaller servo angle.
Servo Reserving Switches
If the direction of travel on the rudder is backwards,
slide the steering reverse switch to the other
position.
It is same principle for the throttle reverse switch.
Steering trim
The steering trim dial is used to adjust the steering
trim when the wheel is centered.
Rotating the dial changes the steering trim (the
steering at rest position.)
Normally, the steering trim is adjusted until the ve-
hicle tracks straight.
www.modster.at
39