Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BMF 423K-AA _ _ -C-2-...
Magnetic Field Sensors
1
About this guide
1.1
Validity
This manual provides all the information you need for safe
use of the BMF 423K-AA _ _ -C-2-... magnetic field
sensors.
It applies to the following models ( see Type code on
page 14):
–
BMF 423K-AAPS -C-2-...
(switching output, PNP N.O.)
–
BMF 423K-AAPO -C-2-...
(switching output, PNP N.C.)
–
BMF 423K-AANS -C-2-...
(switching output, NPN N.O.)
Read this guide and the other applicable documents
completely before installing and operating the product.
Original User's Guide
This guide was created in German. Other language
versions are translations of this guide.
© Copyright 2021, Balluff GmbH
All content is protected by copyright. All rights reserved,
including the right to reproduce, publish, edit and translate
this document.
1.2
Other applicable documents
Additional information about this product can be found at
www.balluff.com on the product page, e.g. in the
following documents:
–
Data sheet
–
Declaration of Conformity
–
Disposal
1.3
Symbols and conventions
Individual action instructions are indicated by a preceding
triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Numbers unless otherwise indicated are decimals
(e.g. 23). Hexadecimal numbers are represented with a
preceding 0x (e.g. 0x12AB).
Note, tip
This symbol indicates general notes.
4
english
1.4
Explanation of the warnings
Always observe the warnings in these instructions and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of the hazard
Consequences if not complied with
► Measures to avoid hazards
The individual signal words mean:
DANGER
The general warning symbol in conjunction with the
signal word DANGER identifies a hazard which, if not
avoided, will certainly result in death or serious
injuries.
Werbung
Kapitel
Inhaltsverzeichnis
