Pulse Function - Rommelsbacher Vera SVD 1400 Bedienungsanleitung

D. Pulse function
• The Pulse function for short-term blending, mixing or
chopping food can only be started in programme selec-
tion mode (if necessary, press the ON/Standby button
first).
• Tapping the Pulse button activates the automatic
function for 8 seconds.
 The display directly shows the residual time as well
as a flashing colon between the digits.
• The Pulse function starts.
 The display shows the residual time of the Pulse
function.
 The automatic mode runs through 3 different speed
levels.
40
• After the time has elapsed, the appliance stops operating automatically.
The display shows "00:00".
• By touching the Start/Pause button you can return to programme
selection mode.
NOTE: The Pulse function can only be activated for 3 times, then the
appliance has to cool down briefly. If the function is activated again, a
cool-down-phase starts and a 30 second countdown is shown. After the
countdown is finished, a single acoustic signal occurs. The appliance swit-
ches to programme selection mode and the Pulse function can be used
again. The signal sound even occurs if the appliance is in standby mode.