C. Using the programmes
1. Programme selection mode
• Tap the ON/Standby button.
Tapping this button is confirmed by a single
acoustic signal.
• The display shows all available programmes.
The soup programme Suppe appears as a preselection.
The pilot lamp above the name of the selected programme
starts flashing.
NOTE: If no other button is pressed within 60 seconds during
programme selection mode, the appliance switches back to
standby mode.
2. Start programme
NOTE: The appliance will not start operating if the lid is not
placed correctly!
• During the running programme, the display shows the selected
programme as well as the residual time with a flashing colon
between the digits.
• You can select the desired programme by
turning the rotary switch to the right or
left.
• e.g. selection of the almond programme.
The pilot lamp or respectively the
name of the selected programme starts
flashing.
• Tap the Start/Pause button.
Tapping this button or starting the
programme is confirmed by a 2-time acoustic
signal tone.
• The selected programme starts, e.g. the almond
programme Mandel.
The display shows the selected programme,
the residual time as well as a flashing colon
between the digits.
37