Liemke LUCHS–1 Bedienungsanleitung Seite 29

(G1-G3), battery charge status and calibration mode (A,
M, S). The Wifi symbol is shown in the top center of the
image only when Wifi is activated.
For use as a clip-on, the position of the information
displayed on the screen can be adjusted to the lowest
magnification of the rifle scope. This keeps the information
visible but at the edge of the field of view without block-
ing the view of the target. The icon display setting can
be changed in the Shot Alignment submenu and saved
together with the alignment setting for the respective
riflescope.
Menu navigation
> Enter the menu by long pressing the MENU button.
> The menu on the left of the screen consists of menu
icons. There is a short information text shown in the top
center of the screen when a menu item is selected.
> Navigate to the desired menu item with the UP and DOWN buttons and select the
desired menu item with a click of the MENU button. Further submenu items, if avail-
able, are indicated by arrows above and below the selected submenu item and
can be selected with the UP and DOWN buttons.
> Choose a menu or submenu function by clicking the MENU button.
> Save and return to the previous menu item by long pressing the MENU button.
> To completely exit the menu from any point in the menu, press and hold the MENU
button for 2 seconds.
06. INPUT MODES
The LUCHS -1 has three different input modes with specific functions directly accessible
by a click or a long press of the buttons. Input Modes can be changed in the Menu
item "Input Mode".
LUCHS -1 · Operating Manual 09 / 2021
2.5x 
View:
E
N
4.0x 
28
–
29