Safety Instructions - Liemke LUCHS–1 Bedienungsanleitung

02. SAFETY INSTRUCTIONS

The thermal imager is not recommended to be used in high temperature environment
for a long time. If the temperature is too high, the imager will enter the high-tempera-
ture protection state, and automatically shut down.
The recommended temperature for use is −10°C to +50°C.
> Make sure that the USB interface cover on the side of the thermal imager is tightly
closed when used in humid environments, e.g. on rainy days.
Disposal of waste electrical equipment and batteries
Do not dispose of waste electrical equipment and batteries in the household waste.
Please hand them in to your local recycling centre. Batteries should be fully discharged
when disposed of.
CE marking: The devices are in conformity with the EU directives:
EMC Directive 2014/35/EU
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
For the EU declaration of conformity see the product homepage on the Liemke website.
CAUTION!
Do not point the lens of the unit at intense energy sources, including laser
units and the sun. Otherwise, there is a risk of damaging electronic compo-
nents of the unit. Damage resulting from non-compliance with the operating
instructions is not covered by the warranty.
LUCHS -1 · Operating Manual 09 / 2021
E
N
24
–
25