Basic Operation - Liemke LUCHS–1 Bedienungsanleitung

05. BASIC OPERATION

Before use
A technical inspection of the device is recommended before use.
> Check the external appearance of the device: There should be no cracks in the
casing.
> Check the condition of the lens and eyepiece: They should be clean and free of
damage.
> Check the condition of the battery: It should be charged if necessary.
> Check the USB connection and the rubber plug: The contacts should be clean and
free of oxidation and the plug should be put firmly in place before use to ensure
protection against moisture.
Lens focus ring
> Focus the objective lens for different distances by turning the focus ring until the
image is sharp.
Flip-Cover
The device comes with a protective flip-cover
installed.
> Open the cover by pushing on the tabs
opposite the hinge.
The cover snaps in place as the hinge opens
completely and sits almost flush with the housing. The cover can be rotated to open
to the left, right or top. The cover can be removed from the device by grabbing the
closed cover at the back of the hinge and pulling it away from the device. It can be
reinstalled by pushing it onto the finishing lip of the objective and snapping it in place.
Adapter threads and thread cover
At the rear of the device there are threads (M43x0.75) for attaching to a clip-on
adapter. The device is delivered with a protective thread cover with a rubberized
eyecup. When using the device as a clip-on, this thread cover needs to be removed by
unscrewing it counterclockwise.
LUCHS -1 · Operating Manual 09 / 2021
E
N
26
–
27