Thermalright Macho Rev. A BW Bedienungsanleitung Seite 12

All manuals and user guides at all-guides.com
Installation Instructions:
Step 1:
Step 1 : Part Installation
Take out Macho cooler from the paper box.Remove the TY-147A from the cooler by pulling the Fan
Clips upwards in order to give room for ease of installation. And leave the fan clips on the Heatsink Body.
Do not remove them. Apply Anti-Vibration Padding to 4 corners on the Heatsink Body.
Step 2:
Step 2 : Screw Pillar Installation
Place the motherboard on top of the Back Plate. See the four Screw Pillars go through the four holes
around the processor socket.Cap the four Screw Pillars with the four Screw Nuts.Make sure the side with
a washer is facing the Back Plate.
Step 3:
1
Step 3 : Anchoring Mount Installation
Place the Anchoring Mount on the Screw Nuts. Use the four M3L6 Screws to fix the Anchoring Mount on
to the Screw Pillars.
7
3
2
4