Flash Setting; Insert Pause - Geemarc AmpliDECT250 Benutzerhandbuch

Base Settings

3 - Flash setting

Your telephone flash time is factory set for the UK (R=100ms).
Do not change this.
However, if your phone is connected to a private network it might require changing. Proceed as
below:
Use ▲and▼to select "BS setting"
Press OK
"Base PIN" is displayed
Enter 1590 or your new code if you changed it
Press OK
Use ▲and▼to select "Flash Time"
Press OK
Use ▲and▼to choice 300 or 600ms
Press OK
Press C twice or once to return to standby mode ...
4 - Insert a pause
If you need to insert a pause between digits whilst dialling, you can set the duration of this pause: 2,3
or 4secs
Use ▲and▼to select "BS setting"
Press OK
"Base PIN" is displayed
23