Troubleshooting; Possible Cause - Scheppach HDA-14 Original Bedienungsanleitung

15. Troubleshooting

The following table shows fault symptoms and describes remedial measures in the event of your machine failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault
Motor does not start.
Air flow too weak.
24 | GB

Possible cause

Mains cable or fuse faulty.
Motor or switch faulty.
External filter blocked.
Inner filter blocked.
www.scheppach.com
Remedy
Check mains cable and fuse.
Contact an electrician.
Blow out or replace filter.
Blow out or replace filter.