Siemens SITRANS FUS060 Betriebsanleitung Seite 102

PROFIBUS-Kommunikation
B.9 GSD-Dateien
Unit_Diag_Bit(25)
Unit_Diag_Bit(26)
Unit_Diag_Bit(27)
Unit_Diag_Bit(28)
Unit_Diag_Bit(29)
Unit_Diag_Bit(30)
Unit_Diag_Bit(31)
Unit_Diag_Bit(32)
Unit_Diag_Bit(33)
Unit_Diag_Bit(34)
Unit_Diag_Bit(35)
Unit_Diag_Bit(36)
Unit_Diag_Bit(37)
Unit_Diag_Bit(38)
Unit_Diag_Bit(39)
Unit_Diag_Bit(55)
User_Prm_Data_Len = 0
;-------- Description of modules
------------------------------------;
; The mandatory modules order is defined at the end of the file by
Assignment of
; Modules using SlotDefinition Keyword.
;
;
from the
; device with the input data, use Free place for this module instead
of another
; identifier.
;
; For the modules of Flow, Sound Velocity and Sound Amplitude you
have the
; choice between these different identifiers:
;
; - Free Place
; - Short identifier format (identifier byte)
; - Long identifier format (extended identifier)
;
; For the modules Quantity net, Quantity forward and Quantity reverse
you have
; the choice between these different identifiers:
;
; - Free Place
; - Long identifier format (extended identifier)
; - Long identifier format, resettable (extended identifier)
;
; With the "resettable" format it is possible to reset the totalizer,
; transmitting suitable output data to the device.
;--------- Modules definitions ------------------------------------;
;------------------------------------------------------------------
; Free place Module - usable for each module instead of another
102
= "Hardware failure mechanics"
= "Motor temperature too high"
= "Electronic temperature too high"
= "Memory error"
= "Measurement failure"
= "Device not initialized"
= "Device initialization failed"
= "Zero point error"
= "Power supply failed"
= "Configuration invalid"
= "Restart"
= "Coldstart"
= "Maintenance required"
= "Characteristics invalid"
= "Ident_Number violation"
= "Extension Available"
Use exactly one identifier per module.
If you don´t want to get the measuring value of a certain module
SITRANS FUS060 mit PROFIBUS PA
Betriebsanleitung, 09/2021, A5E35120951-AD